Oversized Gengar Pokemon Card - Hueforge Hybrid
bycyanidesugar
Turns out a lot of you like Gengar! I got a few requests for this one, and so here it is! I even managed to sculpt the Gengar in Nomad :)
This time I have included TWO options:
-
Non-Simplified .3mf and STL - this is the original file that I used for my print. Bambu Slicer took a while to slice this (maybe 5 minutes), so I would suggest patience if you think it's not slicing. However, if your PC cannot handle it, I have provided option 2 below.
-
Simplified .3mf and STL - this is a decimated version of the file IF your slicer doesn't seem to be slicing the file properly. I would only use this version if it really doesn't slice, as this decimated version will be less detailed than option 1 above.
The 3MF files should have all the settings you need to print this, including height range modifiers as well as layer swaps. Note that if you use the 3MF files, I have used height range modifiers to speed up the print but you absolutely do not have to do that if you don't want to.
The general settings to be followed (if you do not use the 3MF file with the in-built settings) are below:
Print Instructions For the HueForge portion (0.00mm - 2.68mm)
- Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
For Gengar (2.68mm and above)
- Print at 10% infill (I used cross hatch) at a layer height of 0.16mm
- 6 top, 3 bottom surfaces, 3 walls
Filaments Used:
- PLA Kingroon Black Transmission Distance: 0.2
- PLA BambuLab Tough Vermilion Red Transmission Distance: 3
- PLA Sunlu Purple Transmission Distance: 4.3
- PLA Sunlu Lilac Transmission Distance: 6.6
- PLA Kingroon White Transmission Distance: 5.8
- PLA CC3D Yellow Transmission Distance 6.2
Swap Instructions:
- Start with Black
- At 0.84mm swap to Vermilion Red
- At 1mm swap to Purple
- At 1.08mm swap to Lilac
- At 1.56mm swap to White
- At 2.16mm swap to Yellow
- At 2.68 swap to Purple for the rest (this is for Gengar!)
If you'd like my work and would like to support me, you can now subscribe to a Thangs membership plan!, or if you prefer, my Patreon.
Joining will give you access to a private discord, all paid models, early access to some models as well as a commercial license to sell the physical prints of my models.